Non-standard Deep Groove Ball Bearings for automotive gearboxes

I. Basic Dimensions

✅ Model: F-803197.10 (F-803197/10 is an industry abbreviation)

&#...

7408BM is a single-row angular contact ball bearing with the following core parameters: inner diameter 40mm × outer diameter 110mm × width 27mm, contact angle 40°, machined brass cage, and basic rated...

I. Model Designation
7013: 70 Series (extra-light series) angular contact ball bearing
AC: Contact angle of 25°
P6: Precision class 6

II. Basic Standard Parameters<...

7034ACM/DB P6 Angular Contact Ball Bearing
Model Definition
7034: 70 series angular contact ball bearing, dimensions d170×D260×B42
AC: Contact angle 25°
M: Solid brass cage...

I. Bearing Type
LFR series U-groove guide rollers (Gothic arch groove, double-row angular contact ball rollers)—commonly known in the industry as U-groove rollers or linear guide rollers—are de...

I. Bearing Type
Four-point contact ball bearing (single-row angular contact ball bearing), 35° contact angle; capable of supporting bidirectional axial loads and radial loads; solid brass cage....

The 3306-2RS is a double-row angular contact ball bearing with a core size of 30×72×30.2 mm. It has rubber seals on both sides and a typical dynamic load of approximately 41–42.5 kN and a static load ...

564734 (Complete Model: 564734.H195) Bearing Details

I. Basic Type: Heavy-duty truck/trailer integrated hub unit bearing (double row tapered roller hub assembly)
Matching Models:...

42630 is an older Chinese model designation corresponding to the newer model NJ2330; it is a cylindrical roller bearing with a single rib on the inner ring, featuring core dimensions of 150×320×108 mm...

I. Basic Introduction

This is a third-generation integrated wheel hub bearing assembly, integrating the wheel hub flange, double-row bearing, internal spline, mounting bolts, and seals ...