I. Bearing Type
Four-point contact ball bearing (single-row angular contact ball bearing), 35° contact angle; capable of supporting bidirectional axial loads and radial loads; solid brass cage....

The 3306-2RS is a double-row angular contact ball bearing with a core size of 30×72×30.2 mm. It has rubber seals on both sides and a typical dynamic load of approximately 41–42.5 kN and a static load ...

564734 (Complete Model: 564734.H195) Bearing Details

I. Basic Type: Heavy-duty truck/trailer integrated hub unit bearing (double row tapered roller hub assembly)
Matching Models:...

42630 is an older Chinese model designation corresponding to the newer model NJ2330; it is a cylindrical roller bearing with a single rib on the inner ring, featuring core dimensions of 150×320×108 mm...

I. Basic Introduction

This is a third-generation integrated wheel hub bearing assembly, integrating the wheel hub flange, double-row bearing, internal spline, mounting bolts, and seals ...

The 608ZZ bearing features a bore diameter of 8 mm, an outer diameter of 22 mm, and a width of 7 mm; it is a deep-groove ball bearing equipped with double-sided dust shields.
Dimensions
...

6307 2RS Deep Groove Ball Bearing Specifications
Bearing Type: Single Row Deep Groove Ball Bearing
Seal Type: Double-sided Rubber Seal (2RS)
Inner Diameter (d): 35 mm
Outer...

Part numbers 43510-47011 correspond to genuine Toyota front axle hubs and bearing assemblies primarily used in the second-generation Toyota Prius (NHW20). This is a third-generation integrated ball be...

43550‑F4031 (Toyota OE Part Number)
Type: Front Wheel Hub Assembly (Front Right) — 3rd Generation Hub Bearing, featuring Double-Row Angular Contact Ball Bearings + Flange + Studs + Integr...

ZKLF3080-2AP is not a standard model; it should actually be ZKLF3080-2RS-2AP. Its core parameters are as follows:
Inner Diameter (d): 30 mm (tolerance -0.005 mm)
Outer Diameter (D): 80 m...